Please register (it's free!) or login to view the remaining preview.

If you are logged in, your referral link [?] is automatically included below.

EMBED CODE (Copy and Paste)

DOCUMENT DESCRIPTION

The full course on Process Control & Instrumentation, consists of 18 training modules covering topics of Piping and Instrumentation Design (P&ID), Instrumentation, and Control. This document is for 1 of the modules: Density Measurement. Specific topics covered include:

• Definition of Terminology
• Density Elements
• Density Transducers
• Installation Considerations
• Future Technologies

Upon the successful completion of the full course (all 18 modules), you will be able to:

• Apply a comprehensive knowledge on P&ID, instrumentation and control
• Identify the different currently-available methods of pressure and level measurement
• Appreciate the various aspects of density, temperature measurement and the advantages of different instruments used
• Recognize the importance of accurate flow measurement in process control
• Identify operating characteristics of all the commonly available industrial gas and liquid flowmeters in single-phase flows and their performance and limitations in multiphase flows
• Identify some basic aspects of statistics used in process control and instrumentation including repeatability, reproducibility, random and systematic effects and uncertainty and use of calibration graphs
• List the significance of control valve technology in process control and scope of control valve performance
• Identify the different valve and actuator types, control valve accessories and process of control valve selection
• Apply proper procedure for the sizing of control valves for gas and liquid flows
• Identify the problems of flow cavitation and flashing and their control
• Perform installation and maintenance procedures for valves
• Identify the various common control loops and feedback systems
• Implement the different control strategies including manual control, feedback control, feed forward control and simple on-off control
• Recognize safety issues in process control systems in accordance with topics covering cleanliness, fault-finding instrumentation and preventive maintenance
• Enrich knowledge in process control and instrumentation through various worked examples and videos related to plant-wide asset optimization, utilization of plant data and proactive plant maintenance

We can also furnish additional materials via email relevant to your purchased document(s).

For an additional fee, we can provide technical support to relevant engineering projects.

Got a question about the product? Email us at [email protected] or ask the author directly by using the form to the right. If you cannot view the preview above this document description, go here to view the large preview instead.

Source: P&ID, Instrumentation, & Control - Density Measurement PowerPoint document

P&ID, Instrumentation, & Control - Density Measurement

Sold by XRS Consulting Engineers (this author has 165 documents)

$20.00

ALL FEES INCLUDED

Add to Cart

This business document is categorized under the function(s):

Operations

It applies to All Industries

File Type: PowerPoint (pptx)

File Size: 1.7 MB

Number of Slides: 11 (includes cover, transition slides)

Purchase includes lifetime product updates. After your purchase, you will receive an email to download this document.

Initial upload date (first version): Jan 6, 2018
Most recent version published: Jan 7, 2018

Ask the Author a Question

Must be logged in Click here to log in

This document is available as part of the following discounted bundle(s):

P&ID, Instrumentation, & Control Course

$499.00

This bundle contains 17 additional documents.

View Full Details

P&ID, Instrumentation, & Control - Introduction 38-slide PowerPoint deck $29.00 Author:	P&ID, Instrumentation, & Control - Pressure Measurement 66-slide PowerPoint deck $39.00 Author:	P&ID, Instrumentation, & Control - Level Measurement 82-slide PowerPoint deck $39.00 Author:	P&ID, Instrumentation, & Control - Temperature Measurement 68-slide PowerPoint deck $49.00 Author:
P&ID, Instrumentation, & Control - Flow Measurement 38-slide PowerPoint deck $29.00 Author:	P&ID, Instrumentation, & Control - Industrial Flow Meters 112-slide PowerPoint deck $49.00 Author:	P&ID, Instrumentation, & Control - Multiphase Flow Measurement 38-slide PowerPoint deck $29.00 Author:	P&ID, Instrumentation, & Control - Basis Statics 64-slide PowerPoint deck $39.00 Author:
P&ID, Instrumentation, & Control - Control Valves Technology 88-slide PowerPoint deck $39.00 Author:	P&ID, Instrumentation, & Control - Control Valve Performance 32-slide PowerPoint deck $29.00 Author:	P&ID, Instrumentation, & Control - Valves & Actuator Types 52-slide PowerPoint deck $39.00 Author:	P&ID, Instrumentation, & Control - Control Valve Accessories 30-slide PowerPoint deck $39.00 Author:
P&ID, Instrumentation, & Control - Control Valve Selection 72-slide PowerPoint deck $39.00 Author:	P&ID, Instrumentation, & Control - Installation and Maintenance 10-slide PowerPoint deck $20.00 Author:	P&ID, Instrumentation, & Control - Loops & Feedback Systems 50-slide PowerPoint deck $39.00 Author:	P&ID, Instrumentation, & Control - Control Strategies 162-slide PowerPoint deck $49.00 Author:
P&ID, Instrumentation, & Control - Safety Issues 84-slide PowerPoint deck $39.00 Author:

CUSTOMER TESTIMONIALS

"As an Independent Management Consultant, I find Flevy to add great value as a source of best practices, templates and information on new trends. Flevy has matured and the quality and quantity of the library is excellent. Lastly the price charged is reasonable, creating a win-win value for the customer, Flevy and the various authors. This is truly a service that benefits the consulting industry and associated clients. Thanks for providing this service. "

– Jim Schoen, Principal at FRC Group

"One of the great discoveries that I have made for my business is the Flevy library of training materials.

As a Lean Transformation Expert, I am always making presentations to clients on a variety of topics: Training, Transformation, Total Productive Maintenance, Culture, Coaching, Tools, Leadership Behavior, etc. Flevy usually has just what I need to make my point.

It is well worth the money to purchase these presentations. Sure, I have the knowledge and information to make my point. It is another thing to create a presentation that captures what I want to say. Flevy has saved me countless hours of preparation time that is much better spent with implementation that will actually save money for my clients."

– Ed Kemmerling, Senior Lean Transformation Expert at PMG

"As a consulting firm, we had been creating subject matter training materials for our people and found the excellent materials on Flevy, which saved us 100's of hours of re-creating what already exists on the Flevy materials we purchased."

– Michael Evans, Managing Director at Newport LLC

"As a young consulting firm, requests for input from clients vary and it's sometimes impossible to provide expert solutions across a broad spectrum of requirements. That was before I discovered Flevy.com.

Through subscription to this invaluable site of a plethora of topics that are key and crucial to consulting, I have been able to exceed expectations and deliver quality advice and solutions to my clients. The quality and expertise of the authors are exemplary and gives me great confidence to use as part of my service offerings.

I highly recommend this company for any consultant wanting to apply international best practice standards in their service offerings. "

– Nishi Singh, Strategist and MD at NSP Consultants

"Flevy is our 'go to' resource for management material, at an affordable cost. The Flevy library is comprehensive and the content deep, and typically provides a great foundation for us to further develop and tailor our own service offer."

– Chris McCann, Founder at Resilient.World

"I have used FlevyPro for several business applications. It is a great complement to working with expensive consultants. The quality and effectiveness of the tools are of the highest standards."

– Moritz Bernhoerster, Global Sourcing Director at Fortune 500

"Flevy is now a part of my business routine. I visit Flevy at least 3 times each month.

Flevy has become my preferred learning source, because what it provides is practical, current, and useful in this era where the business world is being rewritten.

In today's environment where there are so many challenges and there is the need to make the right decisions in a short time, with so much scattered information, we are fortunate to have Flevy. Flevy investigates, selects, and puts at our disposal the best of the best to help us be successful in our work."

– Omar Hernán Montes Parra, CEO at Quantum SFE

"If you are looking for great resources to save time with your business presentations, Flevy is truly a value-added resource. Flevy has done all the work for you and we will continue to utilize Flevy as a source to extract up-to-date information and data for our virtual and onsite presentations!"

– Debbi Saffo, President at The NiKhar Group

"As a small business owner, the resource material available from FlevyPro has proven to be invaluable. The ability to search for material on demand based our project events and client requirements was great for me and proved very beneficial to my clients. Importantly, being able to easily edit and tailor the material for specific purposes helped us to make presentations, knowledge sharing, and toolkit development, which formed part of the overall program collateral. While FlevyPro contains resource material that any consultancy, project or delivery firm must have, it is an essential part of a small firm or independent consultant's toolbox."

– Michael Duff, Managing Director at Change Strategy (UK)

"I have used Flevy services for a number of years and have never, ever been disappointed. As a matter of fact, David and his team continue, time after time, to impress me with their willingness to assist and in the real sense of the word. I have concluded in fact that it is not at all just a repository of documents/resources but, in the way that David and his team manage the firm, it is like dealing with consultants always ready to assist, advise and direct you to what you really need, and they always get it right.

I am an international hospitality accomplished senior executive who has worked and lived during the past 35 years in 23 countries in 5 continents and I can humbly say that I know what customer service is, trust me.

Aside from the great and professional service that Flevy's team provide, their wide variety of material is of utmost great quality, professionally put together and most current.

Well done Flevy, keep up the great work and I look forward to continue working with you in the future and to recommend you to a variety of colleagues around the world."

– Roberto Pelliccia, Senior Executive in International Hospitality

SELECT CUSTOMERS

Since 2012, we have provided best practices to over 5,000 businesses and organizations of all sizes across the world—in over 130 countries. Below is just a very small sample of our customer base.

Did you know?

The average daily rate of a McKinsey consultant is $6,625 (not including expenses). The average price of a Flevy document is $65.

RECOMMENDATIONS WE HAVE FOR YOU

Three Statement Financial Model with Scenarios Excel workbook $49.00 Author: Profit Vision Integrated Financial Model	Total Productive Maintenance (TPM) 235-slide PowerPoint deck and supporting PDF $89.00 Author: Operational Excellence Consulting Total Productive Maintenance Operational Excellence Autonomous Maintenance	ITIL 4 Foundation Training Course Materials 312-slide PowerPoint deck $20.00 Author: Samir Faraj ITIL	Process Map Series: Hire to Retire 13-slide PowerPoint deck and supporting Excel workbook $20.00 Author: BusinessRules Process Mapping
Strategic Planning - Hoshin Policy Deployment 137-slide PowerPoint deck and supporting Excel workbook $99.50 Author: Operational Excellence Consulting LLC Strategic Planning Strategy Deployment & Exe ... Hoshin Kanri	Design Thinking 225-slide PowerPoint deck and supporting PDF $89.00 Author: Operational Excellence Consulting Innovation Management Customer Experience Ideation	Agile Mindset - The Scrum Practice 105-slide PowerPoint deck $55.00 Author: flynor Agile Scrum	Business Process Improvement (BPI 7) 141-slide PowerPoint deck and supporting Word $49.50 Author: Operational Excellence Consulting LLC Process Improvement Process Analysis
Business Case Development Framework 32-slide PowerPoint deck and supporting Excel workbook $49.00 Author: LearnPPT Business Case Development Financial Modeling	Financial Segregation of Duties Evaluator Excel workbook $20.00 Author: EdmeadFlevy	Strategic Planning: Hoshin Kanri (Policy Deployment) 133-slide PowerPoint deck and supporting ZIP $89.00 Author: Operational Excellence Consulting Strategic Planning Strategy Development Strategy Deployment & Exe ...	Customer Experience Strategy - Template and Guide 56-slide PowerPoint deck $65.00 Author: CustCore Consulting Customer Experience